UDOO NEO is an open hardware low-cost computer equipped with a FreescaleTM i.MX 6SoloX applications processor for Android and Linux. The processor embeds an ARM® Cortex-M4 microcontroller which makes the board compatible with the Arduino environment allowing high performance at a low price. Ideal as a central element of more comprehensive projects, it easily enables the creation of a multitude of IoT applications, making the UDOO NEO even more innovative and appealing.

Full Specs

	Processor	Freescale™ i.MX 6SoloX with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
	Memory	512MB or 1GB DDR3 (only Plus version)
	Graphics	Integrated 2d/3d graphics controller
	Video Out	HDMI interface LVDS interface + touch (I2C signals)
	Video In	Analog camera connection supporting NTSC and PAL 8-bit parallel camera interface*
	Mass Storage	NOR SPI Flash onboard MicroSD card slot onboard 8-bit SDIO interface*
	Audio	HDMI audio transmitter
	USB	1x USB 2.0 Type A ports 1x USB OTG (micro-AB connector)
	Networking	Fast ethernet RJ45 (10/100Mbps) Wi-Fi 802.11 b/g/n, Bluetooth 4.0 Low Energy Wi-Fi Direct Mode SmartConfig
	Serial Ports	3x UART ports* 2x CAN Bus interfaces*
	Other Interfaces	8x PWM signals* 1x I2C interface* 1x SPI interface* 6x multiplexable signals*
	Power Supply	5 V DC Micro USB 6-15 V DC Power Jack Coin Cell RTC Battery Connector
	LEDs	Green Power Status LED User Configurable Red LED
	Integrated Sensors	3-Axis Accelerometer 3-Axis Magnetometer 3-Axis Digital Gyroscope
	Dimensions	85mm x59.3mm (3.35″ x 2.33″)
	Arduino Pinout	Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields.
	Digital I/O Pins	36 available GPIOs
	Analog Input Pins	6
	Operating System	Android & Linux